Troubleshooting of ZZ Bearings

Time：2021.05.24  Source：Roller Bearings Suppliers

What are the causes of ZZ bearing damage?

There are many reasons for ZZ bearing damage. One of the common reasons is that the bearing is dirty and not clean. The typical dirt immersion period is during the initial installation process and during maintenance. Dirt leaks into the ZZ bearing housing through the air, or even through the use of dirty lubricant, enters the ZZ bearing.For example, hard and rough foreign substances such as rust or other metal materials can cause small depressions. Due to overload failure, the depression caused by acid corrosion or corrosion is obviously different. Blockage of hard objects can cause the seat ring to rotate.

A representative of the industry once revealed that more than 95% of all failures of anti-friction ZZ bearings come from defective assembly, unsuitable working conditions and other similar reasons that can usually be found after observation of ZZ bearings.However, many of the above-mentioned failures can be avoided or postponed with better lubricants. The failure caused by water, acid or other corrosive substances on the ZZ bearing is the red-brown surface and very small corrosion holes on the entire exposed surface of the seat ring.Generally, due to the rolling motion, the lubricant is pushed away from the ball track and there is no corrosion on the ball or roller track. Corrosive oxides move like abrasives, which cause wear and leave a dark gray color on the balls or rollers and their races, which contrasts with the red-brown residue on the surface of ZZ bearings.Noise is a sign of failure. If the ZZ bearing is working properly, the sound heard should be a soft whine and loose grease. ZZ 22222-E1-K bearings online , if you are interested , pls contact us .

How to choose the grease of ZZ bearing?

Lubrication has a very important effect on the operation and life of bearings. Here is a brief introduction to the general principles of grease selection. Lubricating grease is made of base oil, thickener and additives. The performance of different types and different types of lubricating grease of the same type is very different. The allowable rotation limit is different. Please pay attention when choosing. The performance of the grease is mainly determined by the base oil. Generally, low viscosity base oil is suitable for low temperature and high speed; high viscosity is suitable for high temperature and high load. Thickener is also related to lubricating performance. The water-resistance of the thickener determines the water resistance of the grease. In principle, greases of different brands cannot be mixed, and even greases of the same thickener can have bad effects on each other due to different additives.

When lubricating bearings, the more grease applied, the better?

When lubricating bearings, the more grease applied, the better. This is a common misconception. Excessive grease in the bearing and bearing chamber will cause an excessive stirring of the grease, resulting in extremely high temperatures. ZZ 22222-E1 bearings online, if you are interested, pls contact us.

What causes ZZ bearing corrosion?

1.In the process of producing bearings, the bearing products are not strictly rust-proofed according to the requirements of cleaning and rust prevention regulations and oil seal rust-proof packaging. For example, the turnaround time of the ferrule is too long, and the outer circle of the outer ring is in contact with corrosive liquid or gas.

2.The quality of anti-rust lubricants, kerosene cleaning and other products used in production does not meet the requirements of process technology regulations.

3.Poor environmental conditions, high levels of harmful substances in the air, and a small turnover area make it difficult to carry out the effective anti-rust treatment. Coupled with the hot weather, production workers violated the anti-rust regulations and other phenomena.

4.Bearing packaging materials such as anti-rust paper, nylon paper (bags) and plastic tubes do not meet the requirements of anti-rust packaging for rolling bearing oil seals, which is also one of the factors causing rust.

5.The turning allowance and grinding allowance of the bearing ring are too small, and the oxide scale and decarburization layer on the outer circle are not completely removed.

Where can I find high-quality bearings?

ZZ Bearing (Shanghai) Co., Ltd (Aka ZZ Bearings) is the complete, one-stop-all kind of bearing supplier & manufacturer. All products are qualified and have passed the ISO 9001 qualification. Here are some popular types of Bearings, Send a quote and get the latest price of cheap bearings from ZZ Bearings.